Concrete Contractor in Robinson, TX - Driveways and Patios Built on Solid Prep
A&L Temple Concrete Construction is a concrete contractor based in Temple that pours driveways, patios, sidewalks and slabs for homes and small businesses in Robinson, TX, with as much care for the ground underneath as the finished surface.
- Fully licensed and insured.
- Free estimates at your property.
- We respond within 1 business day.
Robinson homes and what their concrete goes through
Robinson is a mostly residential city just south of Waco, and most of our calls here come from homeowners with problems like these: a driveway that's cracked and sinking at one edge, a patio that holds water after a storm, front steps that have pulled away from the porch. We also hear from small business owners who need a lot or a shop floor done right. It's the same mix of work we see nearby in Hewitt and Woodway.
A lot of the older driveways and walks we see were poured thin on dirt that was raked flat instead of dug out and packed, and big trees near the drive add roots to the problem. That's why most jobs here start with tearing out the old slab, checking where the water runs and building the base back up before any new concrete goes in.
Concrete work we do for Robinson homes and businesses
Concrete driveway building
Most Robinson driveways we're called to are cracked or sinking at the edges, so we tear out the old slab, rebuild the base and pour new.
Concrete patio construction
A patio here bakes all summer, so we try to pour in the cool of the morning and slope it away from the house so water won't pool.
Stamped concrete services
Stamped concrete gives a Robinson patio or walk the look of stone or brick. It still needs the same packed base, because a pattern doesn't stop settling.
Concrete sidewalk building
We replace front walks that have heaved or tipped where tree roots or water got under them, and pour new paths to the door or back gate.
Garage floor concrete
A garage slab carries a car's weight every day and takes whatever drips off it. We set the thickness and steel to what you'll park there.
Decorative concrete
Color, exposed stone and scored borders let you dress up an entry or patio without the upkeep of pavers that shift and grow weeds between them.
Concrete retaining walls
Sloped yards that wash toward the house or driveway often need a wall to hold the ground back, with drainage behind it so water doesn't push it over.
Concrete floor installation
For shops, barns and small business spaces around Robinson, we pour interior floors flat and level, with joints cut so cracks land where we planned them.
Concrete pool decks
A pool deck here is hot underfoot and wet daily, so we give it a textured finish for grip and slope it to drain away from the pool.
Concrete steps construction
Front steps that have pulled away from the porch or settled out of level are a trip hazard. We rebuild them with even rises and steel tied in.
Slab foundation building
For a new home, addition or outbuilding, we prepare and pour the slab it all sits on, starting with the ground under it and the forms around it.
Foundation installation
When a builder or homeowner in Robinson needs the full foundation, we lay it out, dig, set the steel and pour, checking level at every stage.
Concrete parking lot building
Small business owners call us for lots that have cracked and broken up under daily traffic. We size the base and slab for the vehicles that use it.
Concrete footings
Footings carry the weight of porches, patio covers, walls and additions. We dig them to the depth the job calls for so the structure above doesn't sink.
Foundation raising
If doors stick or a slab has dropped at one corner, we look at what's causing it and talk through raising it before the damage spreads.
Concrete cutting
We saw-cut old slabs for clean removal, openings for doors or plumbing, and joints in new concrete so it cracks along a line instead of across your driveway.
Get a free on-site concrete estimate in Robinson
We'll get back to you within one business day to set a visit. The estimate is free and on site, I send a written quote afterward, and there's no pressure to book.
(254) 791-8043- Based in
- Temple, TX 76501
- Hours
- Mon–Fri: 7 AM–9 PM, Sat–Sun: 6 AM–9 PM
Working in Robinson: permits, contractor checks and price
In Robinson, permits come from the city's Permits and Inspections Department, and its list covers new construction, some repairs and alterations, and remodeling or enlarging a building, so whether your slab needs one depends on the job, and we check with the city for your address before we set a pour date. Every contractor on a Robinson job has to be registered with the city and renew that registration each year, and no permit goes out until they all are, so ask whoever you hire about it, because a lapsed registration stops inspections even on finished work. If an electrician is adding lights or an outlet by a new patio, Texas requires that person to hold a state license, and the city checks it before it registers them.
We drive up from Temple for Robinson jobs and bring the same crew and the same prep we use in Sonterra and Waco. What moves your price is the size and thickness of the slab, how much old concrete comes out, how much digging and base the ground needs once it's open, the steel inside, and any stamped or colored finish. The schedule turns on the permit review, if the job needs one, and the forecast, since I'd rather move a pour than put concrete down ahead of a storm or into the worst of the heat. My written quote after the site visit gives you your own number.
Why Robinson slabs crack, chip and sink
Summer heat is the first thing a pour here has to beat. Weather records for nearby Waco average about 24 days a year at 100 degrees or more, and concrete poured in midday heat dries too fast on top, which leaves a weak, dusty surface that chips. We try to pour early in the day and keep the surface damp through the first days so the top stays hard.
The other thing we see on Robinson properties is older slabs poured on dirt that was raked level instead of dug out and packed, so they've sunk unevenly, and drives that tip back toward the house so water pools at the garage. We dig down to a firm subgrade, the ground the slab rests on, pack a base on top, set the slope so water runs away from the house, and cut control joints, grooves that give the slab a straight line to crack along instead of wandering across it.
How a concrete job in Robinson runs, start to finish
Here's how a job goes from your first call to the cleanup, with me as the person you deal with at the site visit and on pour day.
Call us or send the form
Tell us what you're dealing with, whether it's a cracked driveway, a new patio or a slab for an addition. We'll set a time for me to come look.
I walk the site with you
I look at drainage, trees and what the concrete has to carry, and it helps if you're there so we can walk it together. Then I send a written quote that lists what's in it and what isn't, so you can set it next to anyone else's.
We check permits and schedule
Once you say go, we check with the city about a permit for your address and handle the application if there is one, and the city's plan review usually returns comments in 7 to 15 business days. We set the pour date around that and the weather forecast.
We form, pour and clean up
I'm on site with our crew from forming through the pour, the finishing and the cleanup, so the person who quoted the job is there when it's built. Before we leave, we tell you when it's safe to walk and drive on.
Questions about concrete work in Robinson
Do I need a permit for a pool deck or patio cover in Robinson, TX?
A new pool deeper than 24 inches needs a city permit, and so do patio covers, arbors and outdoor fireplaces. The city's permit guidance lists these. For the slab itself, we ask the city about your address and handle the application if one is needed.
Do I need an engineer for a retaining wall in Robinson, TX?
You do if the wall will be taller than four feet, because the city requires signed and sealed engineering plans above that height. On shorter walls we still plan the drainage behind the wall, since trapped water is usually what pushes a wall over.
Who approves septic plans when I'm building on a lot with septic in Robinson?
The Waco McLennan County Public Health District governs septic plans and installation for buildings on septic, not the city's permit office. If we're pouring a slab or footings for a house or addition on septic, we lay out our work around where the system goes.
How much does a new concrete driveway cost in Robinson, TX?
I give you a price in a written quote after I've walked your site, because what's under the old slab and how much has to come out don't show until I look. If the budget's tight, I'd trim the finish before the base, since a plain broom finish, the light texture that gives tires and shoes grip, on a well-packed base usually outlasts a fancy surface on raked dirt.
What causes concrete driveways to crack in Robinson?
Most cracks come from the slab moving, either settling where the base wasn't packed or pulling apart as the concrete shrinks, and Waco-area records average about 34 days a year at or below freezing, which adds stress. Every slab gets a few cracks, and I'd rather tell you that now. We pack the base, add rebar, the steel bars that hold the pieces together if a crack opens, and cut joints so cracks show up where we chose.
How long before I can drive on a new concrete driveway?
Usually a day or two before you walk on it and about a week before you park on it, longer when it's cold. That wait is curing, the time concrete takes to gain strength, and driving on it early is how edges crack and break off, so we give you the dates for your pour before we leave.
Temple, TX
Get your Robinson concrete job on the calendar
Call (254) 791-8043 or send the form now, because spring and fall mornings are the kindest weather for fresh concrete and an early walk-through gives us the best shot at a pour date in them.